大发云深井潜水泵广泛用于深井提取地下水，也用于河流，水库、水渠等提水工程。主要用于农业灌溉及高原山区的人畜用水，亦可供城市、工厂、铁路、矿山、工地供排水使用。在人民生活和生产中起着重要作用。其具有体积小、重量轻、结构简单、安装使用方便、运行可靠，噪音低、节约能源等特点。

　　今天小编来介绍一下深井潜水泵在电气方面的日常维护：

大发云　　1.定期检查潜水泵对地缘电阻，检查电缆有无破损现象；如有损坏应及时更换，以防漏电；

　　2.经常检查潜水泵的运行电压与电流，用电压表测量三相电压应基本一致；

　　3.泵运转过程中，必须观察仪表读数及泵的振动和声音是否正常，如发现异常情况要及时处理。

大发云Deep well submersible pump is widely used in deep Wells to extract groundwater, but also used in rivers, reservoirs, canals and other water lifting projects. It is mainly used for agricultural irrigation and water for people and animals in mountainous areas of the plateau. It can also be used for water supply and drainage in cities, factories, railways, mines and construction sites. It plays an important role in people's life and production. It has the characteristics of small volume, light weight, simple structure, convenient installation and use, reliable operation, low noise, no pollution and energy saving.

Today small series to introduce the deep well submersible pump in the electrical aspects of the daily maintenance:

1. Regularly check the ground insulation resistance of submersible pump and check whether the cable is damaged; If there is any damage should be replaced in time to prevent leakage of electricity;

2. Check the running voltage and current of submersible pump frequently. The three-phase voltage measured by voltmeter should be basically consistent;

3. During the operation of the pump, it is necessary to observe whether the meter reading and the vibration and sound of the pump are normal, and deal with the abnormal situation in time if found.