潜水电泵在日常使用中，稳定运行是非常重要的，但是在实际使用的时候，也不可避免的会出现一些问题，当然不用担心，往往都是一些小问题，只要能够及时处理就行。今天，水泵生产厂家就来给大家简单说说潜水电泵在运行过程中的常见问题以及一些解决方法。

　　1、潜水电泵在运行中，一定要注意观察出水量是否正常，包括耗油、耗电量是否适当、填料松紧是否合适等，如果这些出现问题，都会影响到潜水电泵的稳定运行。

　　2、高速电机在运行中出现了过热的现象，如果用手摸下电机端盖，短时间感觉太烫，需要停止运行，进行冷却，更换另一台设备运行。

　　3、运行中如果潜水电泵突然停机并且电机有“嗡嗡”声。这可能是电源缺相或者是主回路没有完全断开，应立即拉闸，否则会烧毁电机和设备，然后再仔细查找原因并排除。

　　4、潜水电泵运行时，还要经常注意井中水位的变化情况，定期测量静、动水位，现在仪器仪表的应用对潜水泵的运行情况也能够很好的了解，可以随时观察。

　　以上就是潜水电泵在运行过程中的常见问题及排除方法，希望能够给广大用户提供一定的帮助。

大发云In daily use, it is very important to operate the submersible pump stably, but in actual use, there will inevitably be some problems. Of course, there are often some small problems, as long as they can be dealt with in time. Today, the pump manufacturer will give you a brief introduction of the common problems in the operation of the submersible pump and some solutions.

1. During the operation of the submersible pump, it is necessary to observe whether the water output is normal, including oil consumption, power consumption and packing tightness. If these problems occur, they will affect the stable operation of the submersible pump.

2. The high-speed motor overheats during operation. If you touch the end cover of the motor by hand, it feels too hot for a short time. You need to stop the operation, cool it, and replace another device for operation.

大发云3. During operation, if the submersible pump stops suddenly and the motor has a "buzzing" sound. It may be that the power supply is lack of phase or the main circuit is not completely disconnected, the switch should be pulled immediately, otherwise the motor and equipment will be burned, and then the cause should be carefully found out and eliminated.

大发云4. During the operation of the submersible pump, it is necessary to pay attention to the change of the water level in the well and measure the static and dynamic water level regularly. Now the application of instruments and meters can also have a good understanding of the operation of the submersible pump and can be observed at any time.

The above are the common problems and troubleshooting methods in the operation of the submersible pump, hoping to provide some help to the majority of users.